Cisco Systems OL-5742-01 appendix sgm snmpnext, C-89, Solaris Only, Full Syntax, v snmp version

Appendix C SGM Command Reference

sgm snmpnext

sgm snmpnext

Solaris Only
Full Syntax
sgm snmpnext [-JJVM_ARG1[-JJVM_ARG2]			...] [-vsnmp_version]
[-ccommunity_string] [-rretry] [-ttimeout] [-doutput_delimiter]
[--	header--no-header][--raw-octets--no-raw-octets]
[--	str-octets--no-str-octets][--raw-timeticks		--no-raw-timeticks]
[--	resolve-integer	--no-resolve-integer][--resolve-bits--no-resolve-bits]
[--	get-sysuptime--	no-get-sysuptime][--detect-mib-error][--instance oids]

[--int-instance integer] [--str-instance string] [hostname] [oid] [oid]...

Command Description

Queries the specified hostname using SNMP GetNextRequests. Use the following optional keywords and arguments with this command:

•-JJVM_ARG1—JVM options. The -Jkeyword and arguments must be specified before any other keywords and arguments.

For example, by default JVM uses a maximum of 64 MB of memory. However, if you are walking a large table, JVM might require more memory. To enable JVM to use a maximum of 256 MB of memory, use the following option:

-J-Xmx256m

•-vsnmp_version—SNMP protocol version. Valid versions are 1 or 2c. The default version is 2c.

•-ccommunity_string—SNMP community string. The default community string is specified in the SNMP parameters file, communities.conf.

•-rretry—SNMP retry count. The default retry count is specified in the SNMP parameters file, communities.conf.

•-ttimeout—SNMP timeout, in seconds. The default timeout is specified in the SNMP parameters file, communities.conf.

•-doutput_delimiter—Output delimiter. The default output delimiter is a colon (:).

	Cisco Signaling Gateway Manager User Guide
OL-5742-01		C-89