Cisco Systems OL-5742-01 appendix sgm trapsetup, sgm trapstatus, C-122, Solaris Only Full Syntax

Appendix C SGM Command Reference

sgm trapsetup

sgm trapsetup

Solaris Only

Full Syntax

sgm trapsetup [disable]

Command Description

Stops the SGM server, configures SGM to receive SNMP traps (or prevents SGM from receiving traps), then restarts the SGM server. SGM gives you the option to receive traps natively or using HP OpenView.

When you select an SNMP trap port number for the SGM server, make sure your ITPs use the same SNMP trap port number. See the description of the snmp-server host command in the “ITP Requirements” section of the

Cisco Signaling Gateway Manager Installation Guide for more information.

To prevent SGM from receiving traps, enter the sgm trapsetup disable command. SGM restarts the SGM server.

You must be logged in as the root user (not as a super user) to use this command.

List of SGM Commands

•SGM Command Reference, page C-1.

sgm trapstatus

Solaris Only

Command Description

Displays the current trap reception configuration for SGM, including:

•SNMP trap integration type:

–native—SGM receives traps natively on a UDP port.

–hpov—SGM receives traps using HP OpenView.

•For native, SGM also displays the UDP port number on which SGM receives traps natively.

	Cisco Signaling Gateway Manager User Guide
C-122	OL-5742-01