Cisco Systems OL-5742-01 appendix sgm snmpcomm, sgm snmpconf, C-84, Solaris Only Full Syntax

Models: OL-5742-01

1 136
Download 136 pages 55.23 Kb
Page 84
Image 84
sgm snmpcomm

Appendix C SGM Command Reference

sgm snmpcomm

sgm snmpcomm

Solaris Only

Full Syntax

sgm snmpcomm [name]

Command Description

Enables you to set a new default SNMP read community name. SGM automatically updates the name in the SNMP parameters file. The default path and filename for the SNMP parameters file is /opt/CSCOsgm/etc/communities.conf.

You must be logged in as the root user or as a super user to use this command.

List of SGM Commands

SGM Command Reference, page C-1.

sgm snmpconf

Solaris Only

Full Syntax

sgm snmpconf [filename]

Command Description

Sets the file used for SNMP parameters, such as community names, timeouts, and retries.

The default path and filename for the SNMP parameters file is /opt/CSCOsgm/etc/communities.conf. If you installed SGM in a directory other than /opt, then the file is located in that directory.

When you specify a new path or filename, SGM restarts the servers.

Note The SNMP parameters file uses the HP OpenView format. Therefore, you can set this path and filename to point to the HP OpenView ovsnmp.conf file in an existing OpenView system.

 

Cisco Signaling Gateway Manager User Guide

C-84

OL-5742-01

Page 84
Image 84
Cisco Systems OL-5742-01 appendix sgm snmpcomm, sgm snmpconf, C-84, Solaris Only Full Syntax, Command Description