Cisco Systems OL-5742-01 sgm rootvars, sgm routedir, C-77, Solaris Only Command Description

Appendix C SGM Command Reference

sgm rootvars

sgm rootvars

Solaris Only

Command Description

Displays the contents of the /etc/CSCOsgm.sh file, which determines the root location of the SGM server and client installation.

List of SGM Commands

•SGM Command Reference, page C-1.

sgm routedir

Solaris Only

Full Syntax

sgm routedir [directory]

Command Description

Sets the DPC Route Staging Directory, the directory in which SGM stores ITP route table files, and enables Trivial File Transfer Protocol (TFTP) file transfer for the directory. See the “Editing an SGM ITP Route Table File” section on

page 16-1for information about ITP route table files.

The default DPC Route Staging Directory is located in the SGM installation directory:

•If you installed SGM in the default directory, /opt, then the directory is /opt/CSCOsgm/routes.

•If you installed SGM in a different directory, then the directory is located in that directory.

Use this command if you want to use a different DPC Route Staging Directory, such as /tftpboot, or such as a Network File System location on another server, used as the Trivial File Transfer Protocol (TFTP) server for server configuration files for ITPs in the network.

	Cisco Signaling Gateway Manager User Guide
OL-5742-01		C-77