Cisco Systems OL-5742-01 appendix sgm gttstats node-list id-tag sort-optionquiet, C-39

Appendix C SGM Command Reference

sgm gttstats

After you change the directory, or enable TFTP file transfer for the directory, SGM asks if you want to restart the SGM server. The new directory and TFTP setting take effect when you restart the SGM server.

You must be logged in as the root user or as a super user to use this command.

Note If you are setting up a new GTT Staging Directory on a Network File System location on another (remote) server, make sure the server allows read-write access to the user account being used to run SGM, and run this command as a super user.

List of SGM Commands

•SGM Command Reference, page C-1.

sgm gttstats

Solaris Only

Full Syntax

sgm gttstats [node-list [id-tag]][sort-option] [quiet]

Command Description

Generates SGM GTT accounting statistics reports:

•To include or exclude specific objects in the reports, use the node-listargument:

–To include all nodes, specify all.

–To include a single node or signaling point, specify a single node name, or node name and signaling point name, as the node-listargument. The node name must match exactly the node name as discovered by SGM, including the domain name, and each line must end with a colon (:). For example:

sgm-75-59a.cisco.com:

To specify a node name and signaling point:

sgm-75-59a.cisco.com;net0:

	Cisco Signaling Gateway Manager User Guide
OL-5742-01		C-39