Cisco Systems OL-5742-01 sgm motd, C-57, List of SGM Commands, SGM Command Reference, page C-1

Appendix C SGM Command Reference

sgm motd

If you do not specify the quiet keyword (that is, if you view the output on your terminal), SGM displays only instance-level statistics (as listed in the description of the sort-optionargument). To see the full set of trigger-level statistics, you must use the SGM Web interface. See the “Viewing the MLR Statistics Daily Reports” section on page 15-53for more information.

Before entering this command, you must enable SGM to generate MLR processed, aborts, continues, subtriggers, and triggers reports. See the description of the sgm statreps [mlr nomlr] command for more information.

The first time you use the sgm mlrstats command to generate a report, you must enter the command at least twice:

•The first entry gets the first set of raw data.

•The second entry begins calculating useful accounting statistics and, if the data being collected appears valid, begins generating the report.

Thereafter, you need only enter this command once to generate the report.

See the “Viewing the MLR Statistics Daily Reports” section on page 15-53for more information on MLR reports.

You must be logged in as the root user or as a super user to use this command.

List of SGM Commands

•SGM Command Reference, page C-1.

sgm motd

Solaris Only

Full Syntax

sgm motd [cat disable edit enable]

Command Description

Manages the SGM message of the day file, which is a user-specified SGM system notice. You can use the message of the day to inform users of important changes or events in the SGM system. The message of the day also gives users an opportunity to exit the SGM or GTT client before launching.

	Cisco Signaling Gateway Manager User Guide
OL-5742-01		C-57