Cisco Systems OL-5742-01 sgm cliconntimer, C-21, Solaris Only Full Syntax, Command Description

Appendix C SGM Command Reference

sgm cliconntimer

sgm cliconntimer

Solaris Only

Full Syntax

sgm cliconntimer [number-of-secondsclear]

Command Description

Specifies how long, in seconds, an SGM client is to wait for a message from the SGM server before exiting. If the timer expires, the client pings the server and takes the following action:

•If the server responds to the ping, the client reconnects to the server.

•If the server does not respond to the ping, but there is a backup server configured, the client connects to the backup server.

•If the server does not respond to the ping, and there is no backup server configured, the client stops.

The valid range is 10 seconds to an unlimited number of seconds. The default value is 60 seconds.

To restore the default timeout of 60 seconds, enter the sgm cliconntimer clear command.

Any changes you make take effect when you restart the SGM server.

You must be logged in as the root user or as a super user to use this command.

List of SGM Commands

•SGM Command Reference, page C-1.

	Cisco Signaling Gateway Manager User Guide
OL-5742-01		C-21