Tyco LPE-200 manual Scan Model, Direct Dialing of Individual Calls System Model only

Scan Model

1.To select a pre-stored individual number, enter the menu mode by using the M key. Scroll through the mode list using the < or > key.

Press M. turns on. Scroll through the list of stored phone numbers using the < or >

key until the desired number is displayed. Press M.

2.Press the PTT button; when the radio is clear to

transmit turns on, turns off and the channel access tone sounds. Line one shows the called individual's name or LID. The message *INDV* displays on line two.

Direct Dialing of Individual Calls (System Model only)

The following procedures describes how to initiate and complete a direct dialed individual call.

1.If the individual call ID is not stored in the pre- stored list of call ID's but the individual unit ID is known, it can be entered directly from the keypad.

Note: The ID of the last individual call made can be recalled by pressing # then the OPTION button.

53