88 | 3 Hardware configuration |
Removing and installing a fan module
Figure 47 - Removing and installing a fan module
To remove a fan module
1Remove the front access panel (refer to page 46).
2Grasp the fan module and pull it straight out of the foam baffle.
To install a fan module
Note: If you are replacing a failed fan module, wait for the fan status LED to turn off. Generally, this will take less than ten seconds.
1Remove the front access panel (refer to page 46).
2Place the fan module into the empty slot of the fan assembly so that the fan connector mates with the connector on the fan board.
3Press down firmly to seat the fan module fully into the connector.
4Check the fan status LED for the replacement fan.
If the installation was successful, the indicator will not be lit.
5Reinstall the front access panel (refer to page 46).
