95
15Slide the bracket toward the front of the drive and engage the locating pins on each side of the bracket in the mating holes in the drive frame.
16Position the bracket and drive so that the front of the drive fits correctly in the opening in the front subchassis and the mounting screw hole in the back of the bracket is aligned with the mating hole in the front subchassis.
17Tighten the mounting screw to secure the drive and bracket to the front subchassis.
18Connect the signal and power cables to the drive. The connectors are keyed to fit only one way.
19Install the fan baffle and fan modules.
20Install the front access panel.
