Using Authorized IP Managers

Defining Authorized Management Stations

2.Enter an Authorized Manager IP address here.

3.Use the default mask to allow access by one

management device, or edit the mask to allow access by a block of management devices. See “Building IP Masks”on page 8-9.

4.Use the Space bar to select Manager or Operator access.

5. Press [Enter], then [S] (for Save) to configure the

IP Authorized Manager entry.

Figure 8-2. Example of How To Add an Authorized Manager Entry (Continued)

Editing or Deleting an Authorized Manager Entry. Go to the IP Manag- ers List screen (figure 8-1), highlight the desired entry, and press [E] (for Edit) or [D] (for Delete).

CLI: Viewing and Configuring Authorized IP Managers

Authorized IP Managers Commands Used in This Section

Command

Page

 

 

show ip authorized-managers

below

ip authorized-managers

8-7

<ip-address>

8-8

mask <mask-bits>

8-8

<operator manager>

 

 

 

Listing the Switch’s Current Authorized IP Manager(s)

Use the show ip authorized-managerscommand to list IP stations authorized to access the switch. For example:

Figure 8-3. Example of the Show IP Authorized-Manager Display

8-6

Page 212
Image 212
HP 4100gl manual CLI Viewing and Configuring Authorized IP Managers, Authorized IP Managers Commands Used in This Section