HP 4100gl manual Switch Operating Rules for Radius

RADIUS Authentication and Accounting

Switch Operating Rules for RADIUS

Switch Operating Rules for RADIUS

■

■

You must have at least one RADIUS server accessible to the switch.

The switch supports authentication and accounting using up to three RADIUS servers. The switch accesses the servers in the order in which they are listed by show radius ( page 3-23). If the first server does not respond, the switch tries the next one, and so-on. (To change the order in which the switch accesses RADIUS servers, refer to “Changing RADIUS-Server Access Order” on page 3-27.)

■You can select RADIUS as the primary authentication method for each type of access. (Only one primary and one secondary access method is allowed for each access type.)

■In the HP switch, EAP RADIUS uses MD5 and TLS to encrypt a response to a challenge from a RADIUS server.

3-4