Using Authorized IP Managers
Defining Authorized Management Stations
The above example shows an Authorized IP Manager List that allows stations to access the switch as shown below:
IP Mask | Authorized Station IP Address: | Access Mode: |
255.255.255.252 | 10.28.227.100 through 103 | Manager |
255.255.255.254 | 10.28.227.104 through 105 | Manager |
255.255.255.255 | 10.28.227.125 | Manager |
255.255.255.0 | 10.28.227.0 through 255 | Operator |
|
|
|
Configuring IP Authorized Managers for the Switch
Syntax: ip
Configures one or more authorized IP addresses.
[mask
Configures the IP mask for < ip address >
<operator manager>
Configures the privilege level for < ip address>.
To Authorize Manager Access. This command authorizes
HPswitch(config)# ip
Similarly, the next command authorizes
HPswitch(config)# ip
If you omit the mask when adding a new authorized manager, the switch automatically uses 255.255.255.255 for the mask. If you do not specify either Manager or Operator access, the switch automatically assigns the Manager access. For example:
HPswitch(config)# ip