![](/images/backgrounds/285815/hp-4100gl-users-manual-549937181x1.png)
Configuring
Messages Related to 802.1x Operation
Messages Related to 802.1x OperationTableMessage | Meaning |
|
|
Port < | The ports in the port list have not been enabled as 802.1x |
authenticator. | authenticators. Use this command to enable the ports as |
| authenticators: |
| HPswitch(config)# aaa |
| authenticator e 10 |
Port <
No server(s)responding. | This message can appear if you configured the switch for |
| |
| switch does not receive a response from a RADIUS server. |
| Ensure that the switch is configured to access at least one |
| RADIUS server. (Use show radius.) If you also see the |
| message Can’t reach RADIUS server < |
| x.x.x.x >, try the suggestions listed for that message |
| (page |
LACP has been disabled on 802.1x port(s).
Error configuring port <
To maintain security, LACP is not allowed on ports configured for 802.1x authenticator operation. If you configure port security on a port on which LACP (active or passive) is configured, the switch removes the LACP configuration, displays a notice that LACP is disabled on the port(s), and enables 802.1x on that port.
Also, the switch will not allow you to configure LACP on a port on which port access (802.1x) is enabled.