CS 2245S | Jonsered CS 2250S instruction

CS 2245

CS 2245S

CS 2250S Operator’s manual EPA II

English

Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.

Image 1

Jonsered CS 2250S manual CS 2245S

Contents

CS 2245S Symbols on the machine KEY to SymbolsSymbols in the operator’s manual You will ﬁnd the following labels on your chain saw Contents Dear customer Introduction What is what on the chain saw? What is WHAT? Before using a new chain saw General Safety Precautions Always use common sense Machine′s safety equipmentPersonal protective equipment Chain brake and front hand guard General Safety Precautions Chain catcher Throttle lockoutRight hand guard Cutting equipment Stop switchVibration damping system Mufﬂer Bar Cutting equipment designed to reduce kickbackChain General information on sharpening cutting teeth Sharpening your chain and adjusting depth gauge setting Tensioning the chain CS 2245S, CS 2250S Lubricating cutting equipment Checking chain lubrication Filling with chain oilChain drive sprocket Checking wear on cutting equipment Needle bearing lubrication Fitting the bar and chain AssemblyWorking with the chain Assembly Fuel Fuel Handling Fueling Fuel safetyTransport and storage Long-term storage Starting and stopping Starting and StoppingStarting Warm engine Stopping Working Techniques Basic safety rulesBefore use General working instructions General rules Terms Basic cutting technique Limbing Tree felling techniqueLog is supported at one end. There is a high risk Safe distance Clearing the trunk and preparing your retreat Felling directionDirectional cuts Felling cut What is kickback? How to avoid kickbackFreeing a tree that has fallen badly Cutting the trunk into logs Carburetor adjustment MaintenanceGeneral Checking the inertia brake release Mufﬂer Replacing the starter cord StarterTensioning the recoil spring Replacing the return and drive springs Air ﬁlterFitting the starter Lubricating the bar tip sprocket Spark plugNeedle bearing lubrication Cooling system Temperature -5C 23F or colder Turbo Air Cleaning centrifugal cleaningWinter use Daily maintenance Weekly maintenance Monthly maintenance Maintenance schedule Technical data Technical Data 050/1,3 mm Bar and chain combinations058/1,5 mm Saw chain ﬁling and ﬁle gauges Repair or Replacement of Parts Repair or Federal Emission Control Warranty Statement Safety precautions for chain saw users American Standard Safety PrecautionsKickback safety precautions Other safety precautions 1151012-95