Manuals / Jonsered / Lawn and Garden / Chainsaw

Jonsered CS 2245S Contents, Key To Symbols, Introduction, What Is What?, Assembly, Fuel Handling

Models: CS 2250S CS 2245 CS 2245S

1 44

Download 44 pages 53.34 Kb

Page 3

CONTENTS

CONTENTS

Contents
KEY TO SYMBOLS
Symbols on the machine:	2
Symbols in the operator’s manual:	2
CONTENTS
Contents	3
INTRODUCTION
Dear customer!	4
WHAT IS WHAT?
What is what on the chain saw?	5
GENERAL SAFETY PRECAUTIONS
Before using a new chain saw	6
Important	6
Always use common sense	7
Personal protective equipment	7
Machine′s safety equipment	7
Cutting equipment	10
ASSEMBLY
Fitting the bar and chain	17
FUEL HANDLING
Fuel	19
Fueling	20
Fuel safety	20
STARTING AND STOPPING
Starting and stopping	21
WORKING TECHNIQUES
Before use:	23
General working instructions	23
How to avoid kickback	29
MAINTENANCE
General	31
Carburetor adjustment	31
Checking, maintaining and servicing chain saw
safety equipment	31
Mufﬂer	33
Starter	34
Air ﬁlter	35
Spark plug	36
Lubricating the bar tip sprocket	36
Needle bearing lubrication	36
Cooling system	36
”Turbo Air Cleaning” centrifugal cleaning	37
Winter use	37
Maintenance schedule	38
TECHNICAL DATA
Technical data	39
Bar and chain combinations	40
Saw chain ﬁling and ﬁle gauges	41

FEDERAL EMISSION CONTROL WARRANTY
STATEMENT
YOUR WARRANTY RIGHTS AND OBLIGATIONS	42
AMERICAN STANDARD SAFETY
PRECAUTIONS
Safety precautions for chain saw users	43

English – 3

Image 3

Jonsered CS 2245S Contents, Key To Symbols, Introduction, What Is What?, General Safety Precautions, Assembly, Maintenance

Contents

CS CS 2245S CS 2250S Operator’s manual EPAEnglish You will ﬁnd the following labels on your chain saw EPA KEY TO SYMBOLSSymbols on the machine Symbols in the operator’s manualCONTENTS CONTENTSContents KEY TO SYMBOLSDear customer INTRODUCTIONWhat is what on the chain saw? WHAT IS WHAT?WARNING! Under no circumstances may GENERAL SAFETY PRECAUTIONSBefore using a new chain saw WARNING! Faulty cutting equipment orChain brake and front hand guard Machine′s safety equipmentAlways use common sense Personal protective equipmentThe brake is applied when the front hand guard B is pushed forwards GENERAL SAFETY PRECAUTIONSRight hand guard Will my hand always activate the chain brake during a kickback?Throttle lockout Chain catcherMufﬂer Stop switchCutting equipment Vibration damping systemsaw chain can cause extremely serious injuries Cutting equipment designed to reduce kickbackChain WARNING! Any contact with a rotatingincreases the risk of kickback Sharpening cutting teeth Sharpening your chain and adjusting depth gauge settingGeneral information on sharpening cutting teeth WARNING! Departure from the sharpening instructions considerablyTensioning the chain General advice on adjusting depth gauge settingincreased if the depth gauge setting is Adjustment of depth gauge settingChain oil Lubricating cutting equipmentCS 2245S, CS 2250S WARNING! Poor lubrication of cuttingGENERAL SAFETY PRECAUTIONS Filling with chain oilChecking chain lubrication Chain drive sprocketGENERAL SAFETY PRECAUTIONS happen when the chain touches the operatorNeedle bearing lubrication Checking wear on cutting equipmentworking with the chain ASSEMBLYFitting the bar and chain WARNING! Always wear gloves, whenASSEMBLY Gasoline adequate ventilation when handling fuelFUEL HANDLING FuelLong-term storage Fuel safetyFueling Transport and storageWarm engine STARTING AND STOPPINGStarting and stopping StartingSTARTING AND STOPPING StoppingGeneral working instructions Basic safety rulesWORKING TECHNIQUES Before useWORKING TECHNIQUES General rules6 Always use a fast cutting speed, i.e. full throttle Terms Basic cutting techniqueWARNING! Never use a chain saw by GeneralThe log is supported at one end. There is a high risk Tree felling techniqueLimbing Cutting WARNING! Never attempt to cut logsDirectional cuts Felling directionClearing the trunk and preparing your retreat Felling WARNING! Unless you have specialWORKING TECHNIQUES Felling cutFreeing a tree that has fallen badly How to avoid kickbackWhat is kickback? General adviceLimbing WARNING! A majority of kickback Cutting the trunk into logsWORKING TECHNIQUES Basic settings and running in MAINTENANCECarburetor adjustment Checking, maintaining and servicing chain saw safety equipmentMAINTENANCE When the bar hits the stump the brake should be appliedChecking the inertia brake release Checking the brake triggerChain catcher MufﬂerMAINTENANCE Stop switchTensioning the recoil spring WARNING! When the recoil spring isStarter Replacing the starter cordRecoil spring A Air ﬁlterReplacing the return and drive springs Fitting the starterCooling system Spark plugLubricating the bar tip sprocket Needle bearing lubricationMAINTENANCE ”Turbo Air Cleaning” centrifugal cleaningTemperature -5C 23F or colder Winter useMonthly maintenance Maintenance scheduleDaily maintenance Weekly maintenanceCS 2245S TECHNICAL DATATechnical data WeightPitch, inch Recommended original and replacement bar and chain combinationsBar and chain combinations Length, inchTECHNICAL DATA Saw chain ﬁling and ﬁle gaugesWHAT IS NOT COVERED FEDERAL EMISSION CONTROL WARRANTY STATEMENTYOUR WARRANTY RIGHTS AND MANUFACTURER S WARRANTYOther safety precautions AMERICAN STANDARD SAFETY PRECAUTIONSSafety precautions for chain saw users Kickback safety precautions1151012-95 ´z+S!=¶57¨ 2008-05-30 ´z+S!=¶57¨