Jonsered GR 2126D manual Safety Instructions, Personal protective equipment, Throttle trigger lock

SAFETY INSTRUCTIONS

Personal protective equipment

IMPORTANT INFORMATION

• Incorrect or careless use of a clearing saw,

brushcutter or trimmer can turn it into a dangerous

tool that can cause serious or even fatal injury to

the operator or others. It is extremely important

that you read and understand the content of this

manual.

• When using a clearing saw, brushcutter or trimmer,

protective equipment approved by the appropriate

authorities must be used. Personal protective

equipment does not eliminate the risk of accidents,

however, it can reduce the effects of an injury in

The machine‘s safety equipment

This section describes the machine‘s safety equipment, its function and how checks and maintenance are carried out to ensure that it operates correctly. (See the chapter “What is what“ to locate where this equipment is positioned on your machine.)

!WARNING!

Never use a machine with defective safety equipment. Follow the control, maintenance and service instructions described in this section.

the event of an accident. Ask your dealer for help

when choosing protective equipment.

!WARNING!

Remove your hearing protection as soon as you stop the engine, so that you can hear any noises or warning signals.

HELMET

A helmet should be worn if trees to be cleared are higher than 2 metres.

EAR PROTECTION Ear protection offering sufficient dampening effect should be used.

EYE PROTECTION Blows from branches or objects thrown by the rotating cutting equipment can damage the eyes.

GLOVES

Gloves should be worn when necessary, e.g., when assembling cutting equipment.

BOOTS

Use anti-slip and stable boots.

CLOTHING

Wear clothes made of a strong fabric and avoid loose clothing that can catch on shrubs and branches. Always wear heavy-duty long pants. Do not wear jewellery, shorts, sandals or go barefoot. Secure hair so it is above shoulder level.

FIRST AID KIT

A first aid kit should be carried by operators of clearing saws, brushcutters or trimmers.

1.Throttle trigger lock

The throttle trigger lock is designed to prevent the throttle from accidentally being engaged. When the trigger lock (A) is pressed into the handle (= when you hold the handle) the throttle

(B)is released. When the grip on the handle is released the throttle and the throttle trigger lock return to their original positions. This takes place via two independent return spring systems. This means that the throttle is automatically locked in its “idling“ position.

A

B

A

B

4 – English