TECHNICAL DATA
Technical data
Engine
Displacement, cu. in/cm3 Cylinder bore, inch/mm Stroke length, inch/mm Recommended max. speed, rpm Idling speed, rpm
Speed of output shaft, rpm
Max. engine output, acc. to ISO 8893, kW/rpm Catalytic converter muffler
Ignition system Manufacturer/type of ignition system Spark plug
Electrode gap, inch/mm
Fuel lubrication system
Manufacturer/type of carburetor
Fuel tank capacity, US pint/litres
Weight
Weight without fuel, cutting tool and guard, Lbs/kg
Sound levels (se note 1)
Equivalent sound pressure level at the user’s ear, measured according to ANSI
Vibration levels
Vibration levels on the handles, measured according to ANSI
At max. speed, left/right handles, min: At max. speed, left/right handles, max:
GT2125L | GR2126L |
1,50/24,5 | 1,50/24,5 |
1,26/32 | 1,26/32 |
1,06/27 | 1,06/27 |
11 | 11 |
2 700 | 2 700 |
11 700 | 8 014 |
0,9/ 9 000 | 0,9/ 9 000 |
No | No |
Yes | Yes |
Walbro MB | Walbro MB |
Champion RCJ 7Y | Champion RCJ 7Y |
NGK BPMR 7A | NGK BPMR 7A |
0,02/0,5 | 0,02/0,5 |
Zama C1Q | Zama C1Q |
1,06/0,5 | 1,06/0,5 |
9,0/4,1 | 9,0/4,1 |
94/94 | 93/99 |
2,3/1,0 | 1,0/1,1 |
2,3/1,0 | 1,4/1,3 |
3,4/3,9 | 3,0/6,0 |
3,4/3,9 | 4,5/7,3 |
Note 1: Equivalent sound pressure level is calculated as the
working conditions with the following time distribution: 1/2 idling and 1/2 max speed.
NOTE! The noise pressure level at operator’s ear and vibrations on the handles are measured with all the approved cutting attachments for the machine. The table indicates the lowest and highest values.
Approved accessories | Type | Cutting attachment guard Art No. |
GT2125L: |
|
|
Thread blade shaft 3/8 |
|
|
Trimmer head | Tap´n go VII(R) | 530 05 |
GR2126L: |
|
|
Thread blade shaft M10 |
|
|
Trimmer head | Trimmy HII | 503 97 |
| Tap´n go Pro | 503 97 |
Plastic knifes | Polytrim | 503 97 |
20 – English
