Jonsered GT2125L manual Contents

CONTENTS

Jonsered has a policy of continuous product development and therefore reserves the right to modify the design and appearance of products without prior notice.

Maintenance, replacement, or repair of the emission control devices and systems may be performed by any nonroad engine repair establishment or individual.

!WARNING!

Under no circumstances may the design of the machine be modified without the permission of the manufacturer. Always use genuine accessories. Non-authorized modifications and/or accessories can result in serious personal injury or the death of the operator or others.

Your warranty does not cover damage or liability caused by the use of non- authorized accessories or replacement parts.

The Emissions Compliance Period referred to on the Emissions Compliance label indicates the number of operating hours for which the engine has been shown to meet Federal emission requirements.

Category C = 50 hours, B = 125 hours, and A = 300 hours.

List of contents
SYMBOL EXPLANATION
Symbols	2
CONTENTS
List of contents	3
SAFETY INSTRUCTIONS
Personal protective equipment	4
The machine‘s safety equipment	4
Control, maintenance and service of the machine‘s safety
equipment	6
Cutting equipment	7
General safety instructions	8
General working instructions	9
Basic working techniques	9
WHAT IS WHAT?
What is what on the trimmer?	11
ASSEMBLY
Assembling the loop handlebar (GT2125L)	12
Assembling the loop handlebar (GR2126L)	12
Assembly of the trimmer head	12
Assembling the spray guard and trimmer head Auto32
(GR2126L)	13
Assembling other guards and cutting equipment
(GR2126L)	13
Fitting the spray guard and trimmer head (GT2125L)	13
FUEL HANDLING
Fuel mixture	14
Fuelling	14
START AND STOP
Control before starting	15
Start and stop	15
MAINTENANCE
Carburettor	16
Muffler	18
Cooling system	18
Spark plug	18
Air filter	19
Angle gear	19
Maintenance schedule	19
TECHNICAL DATA
GT2125L	20
GR2126L	20
EMISSION CONTROL WARRANTY STATEMENT
Your warranty rights and obligations	21

English – 3