DESCRIPTION |
|
| |
1 | Upper handles | 12 | Rear deflector |
2 | 13 | Throttle lever | |
3 | Fastening knobs for upper handles | 14 | Engine stop lever |
4 | Grass catcher | 15 | Reduction gear |
5 | Oil filler cap | 16 | |
6 | Oil drain plug | 17 | |
7 | Deck | 18 | Clutch lever |
8 | Adjusting levers for cutting height |
|
|
9 | Spark plug |
|
|
10 | Fuel cap |
|
|
11 | Engine |
|
|
ASSEMBLY OF GRASS CATCHER
ASSEMBLY DEFLECTOR (if not already assembly)
Assembly deflector ,only for the models with this equipment (Fig.CVII)
ASSEMBLY HANDLES (lower)
ASSEMBLY HANDLES (upper)
ADJUSTMENT OF HANDLES |
MULCHING CAP INSERTION (for the models where it is included only) |
To cut the grass with the mulching system (no grass collection), lift the rear deflector panel and insert the cap |
by fixing it with the spring as shown in the figure.
ADJUSTMENT OF CUTTING HEIGHT
SAFETY PRECAUTIONS
Always operate with the deflector or grasscatcher in the correct position.
Always stop the engine before removing the grasscatcher or adjusting the height of cut.
Never place your hands or feet underneath the deck or into the grass discharge chute while the engine is running.
Before mowing, remove all foreign objects from the lawn | Never lift the rear of the mower while starting the engine |
which may be thrown by the machine. While mowing, | or during normal operation. |
stay alert for any foreign objects which may have been | Never place your hands or feet underneath the deck or into |
missed. | the rear discharge chute while the engine is running. |
