Juniper Networks IDP250 manual Click Finish

Chapter 7: Adding the IDP Appliance to NSM

Figure 16: NSM Add Device Wizard: Add Device Confirmation

8.Click Next to import the configuration from the IDP device. Upon success, NSM displays the following message:

Figure 17: NSM Add Device Wizard: Configuration Import Confirmation

9.Click Finish.

For IDP 4.1 and later devices, NSM next runs a job to update the IDP device with the Recommended IDP security policy. The Job Information dialog box shows the status of the Update Device job.

10.After the job is complete, double-click the device in Device Manager to view the imported configuration.

To check the device configuration status, mouse over the device and verify that the device status displays Managed.

Adding a Reachable IDP Device to NSM ■ 45