Juniper Networks IDP250 manual Fiber Ports

IDP250 Installation Guide

Table 9: Copper Port LEDs

LED	State	Description
LINK ACT	Glows green	Link is present.
	Blinks green	Activity.
	Off	No link present.
LINK SPD	Green	Connection is 100 Mbps.
	Yellow	Connection is 1 Gbps.
	Off	If LINK ACT is on, the connection is 10 Mbps. If LINK ACT
		is off, LINK SPD off indicates no link is present as well.
BYP	Green	Interface is not in bypass mode.
	Yellow	Interface is in bypass mode.
	Off	Interface is turned off (NICs off state).

NOTE: For copper interface ports, if failure or shutdown triggers NICs off state, LINK ACT and LINK SPD LEDs are turned off.

Fiber Ports

Figure 5 on page 8 shows fiber port LEDs.

Figure 5: Fiber Port LEDs

Table 10 on page 9 describes fiber port LED states.

8■ Traffic Interface Ports