11.11 Empty system
This procedure is necessary in order to protect the machine from damage by frost in transport.
Switch the machine OFF with the ON/OFF 
switch.
Place a vessel under the pivoting nozzle for hot water/steam (13).
Turn the selector switch for hot water/steam (12) to position 
.
Switch your machine back on again with the ON/OFF 
switch. The 
symbol lights up.
Press the maintenance key 
until the symbol 
flashes. 
.
Draw steam off until the flow of steam is automatically inter- rupted and the 
symbol lights up on the display.
After this, turn the selector switch for hot water/steam (12) back to the 
position.
12. Cleaning
The machine has an integrated cleaning programme.
If the machine needs cleaning, the 
symbol flashes.
You can continue to draw off coffee or hot water/steam and run the cleaning programme later.
Only use Jura cleaning tablets. They are available from your Jura dealer.
You must not interrupt the cleaning programme once it has started.
Switch your machine on with the ON/OFF 
key.
Press the maintenance key (4) for about 3 seconds. The 
(only when necessary), 
, 
symbols light up.
Fill the water tank.
Empty the drip tray and the grounds container and put both of them back in again. The 
(only when necessary), 
symbols
go off and the 
symbol appears.
Please a vessel under the coffee spout (9) and press the mainten-
ance key (4). The 
symbol goes off.
The 
symbol lights up to inform you that the cleaning process has been activated.
If the 
symbol lights up, empty the drip tray (if necessary) and
put it back in again. The 
symbol goes off and the 
, 
,
symbols light up.
Now put a Jura cleaning tablet into the filler funnel for powder coffee (10) (Fig. 9).
Press the maintenance key (4). The 
, 
symbols go off.
The cleaning process is continued. This is displayed by the symbol lighting up.
If the 
symbol lights up again, empty the drip tray (if neces- sary), wait for about 10 seconds before putting it back in again. The 
symbol goes off and the 
, 
symbols light up.
Place a vessel under the coffee spout (9) again and press the maintenance key (4).
The cleaning process is continued. This is displayed by the 
symbol lighting up. As soon as it has been completed, the 
symbol lights up.
14
