Jura Capresso IMPRESSA X9 manual Information, Grounds Empty, Drip Tray Empty, Counter Reset

INFORMATION

Press P (Fig. 5/E) to activate the INFORMATION programming step.

1 ESPRESSO

200 PRODUCTS

Press the «+» or «–» key to select the required item of infor- mation.

You can leave the INFORMATION menu any time by pressing EXIT (Fig. 5/K).

Press the «+» or «–» key to select the next program step or press EXIT (Fig. 5/K) to leave programming mode.

Under TOTAL you will find all the products made (coffee, hot water and steam)

15. Counter

The single counter allows you to record your consumption over a defined period of time. This counter can be reset to 0 at any point in time.

16.2 Installing a fixed water supply system

Please refer to the operating instructions for the fixed water supply system or contact your JURA dealer.

16.3 Emptying the coffee grounds container

The coffee grounds container collects the coffee grounds.

GROUNDS

EMPTY

If this information is displayed, the machine will no longer make coffee. The grounds container needs to be emptied.

Carefully take out the drip tray; it is filled with water. Remove the grounds container (Fig. 9/ A).

16.4 Emptying the drip tray E

DRIP TRAY

EMPTY

If this information is displayed, the machine will no longer make coffee. The drip tray needs to be emptied.

Carefully take out the drip tray; it is filled with water (Fig. 9/B).

COFFEE READY

Press Counter (Fig. 5/D) until you hear an acoustic signal.

1 ESPRESSO

150 PRODUCT

Press the «+» or «–» key to select a product.

The display will indicate the number of times this product was made.

Press EXIT (Fig. 5/K) to leave the COUNTER.

Reset counter:

COUNTER

RESET

NO

Press the «+» or «–» key until the display indicates

COUNTER

RESET

YES

Press P to confirm your selection (Fig. 5/E).

RESET

16. Maintenance

16.1 Filling the water tank

WATER TANK

FILL

If this message is displayed, the machine will no longer make coffee/hot water. Refill water as described in Chapter 3.3.

The water tank should be rinsed out and filled with fresh water daily. When using a fixed water supply system, we recommend regularly rinsing the water tank and filling it with fresh water.

16.5 Grounds bin missing

GROUNDS BIN

MISSING

If this message lights up, the grounds bin is not installed properly or missing altogether.

16.6 Filling the bean tank

COFFEE READY

FILL

BEANS

The display dialog system indicates which of the two bean tanks is empty. Fill tank with beans as described in Chapter 3.4.

The bean level is monitored electronically on the IMPRES- SA X9. To ensure smooth operation, we recommend that you regularly clean the bean tanks with a dry cloth. Switch the machine off with the ON / OFF key (Fig. 5/A) before you do so.

Switch the machine off with the power switch on the rear of the machine (Fig. 15/D).

16.7 Removing stones

Open the programming door on the front (Fig. 4) and switch the IMPRESSA X9 off with the ON / OFF key (Fig. 5/A).

Switch the machine off with the power switch on the rear of the machine (Fig. 15/D) and disconnect it from the mains supply.

Open the hinged door on reverse of the machine (Fig. 10).

Push sliders to the rear (Fig. 10) and take the bean tank out of the machine.

Remove any beans with a vacuum cleaner.

Insert the key (Fig. 11).

Now turn the key counter-clockwise until the jammed stone is released.

Remove any remaining powder with a vacuum cleaner.

Re-install the bean tank and pull the sliders to the front before closing the door (Fig. 10).

13