Jura Capresso IMPRESSA XS90, 95 Rinsing the machine, Making coffee with pre-ground coffee powder

Fill the water tank (14) with cold, fresh tap water and place it back into the machine.

Place a sufficiently large receptacle (min. 0.5 litres) under the pivoting steam spout (23) and press one of the Steam keys to start the filter rinsing process.

 FILTER RINSING

Filter rinsing stops automatically.

 SELECT PRODUCT

You can also trigger a change of filter manually from the Maintenance menu at any point in time (only if the filter has been activated) - see Chapter 13.3.

6. Rinsing the machine

If the coffee machine is switched off and has cooled down, you will be prompted to start a rinsing cycle when switching the machine back on. The rinsing cycle starts automatically when you switch the machine off.

 PRESS RINSE

Place a cup under the coffee spout (18).

Press Rinse .

 MACHINE RINSING

 SELECT PRODUCT

You can also trigger a rinsing cycle manually from the Main- tenance menu at any point in time (see Chapter 13.3).

7.Making coffee

(1 espresso, 2 espressos, 1 coffee, 2 coffees)

 SELECT PRODUCT

Place 1 or 2 cups (as required) under the coffee spout (18) and press a key of your choice , , , . The pre-brewing

process (I.P.B.A.S.) moistens the coffee powder, briefly inter- rupts the flow of hot water and then begins with the actual brew- ing process.

 1 ESPRESSO (example) NORMAL (example)

The coffee brewing process stops automatically as soon as the set amount of water has run through.

 SELECT PRODUCT

To stop the brewing process prematurely, press any of the product keys.

You can change the amount of water while the machine is brewing coffee. Open the programming door. Turn the Rotary Switch (4) until the display indicates the required amount (ML). The amount of water can be selected in incre- ments of 5 ML.

The amounts given in ML are approximate values and may vary from the effective quantity.

7.1. Making coffee with pre-ground coffee powder

Never use water-soluble instant coffee.

 SELECT PRODUCT

Place 1 or 2 cups (as required) under the coffee spout (18) and open the programming door (3). Press the selection key for pre- ground coffee .

 FILL

POWDER / SELECT PRODUCT

Now fill 1 or 2 level scoops of pre-ground coffee into the filler funnel for pre-ground coffee (17).

Then press a product key of your choice.

10