MACHINE RINSING
The coffee spout (18) is rinsed.
13. Programming
The IMPRESSA leaves the factory with a number of default settings that allow you to make coffee without having to pro- gram the machine first. You can, however, adjust various parameters to make the coffee suit your personal taste.
The following parameters can be adjusted:
Filter
Water hardness
Rinse
Powder quantity
Water quantity
Temperature
Water portion
Steam portion
Economy mode
Time
Automatic
Automatic
Language
Display
Information (to be viewed only)
13.1 Programming the filter
Please refer to Chapter 5 “Using the CLARIS plus filter cartridge”.
13.3 Maintenance
You can activate the following maintenance functions from this program item:
RINSE MACHINE, CLEAN MACHINE,
“CHANGE FILTER” is not displayed if you are not using a CLARIS plus filter and the filter is set to “NO”.
SELECT PRODUCT
Open the programming door (3). Press the Rotary Switch (4) until you hear an acoustic signal.
FILTER
NO or YES
Turn the Rotary Switch (4) until the following message is dis- played:
RINSE
Now press the Rotary Switch (4) to start programming.
RINSE
MACHINE
Turn the Rotary Switch (4) until the required maintenance func- tion (for selection see above) is displayed. Press the Rotary Switch (4) to activate the function.
The Maintenance menu closes automatically after 5 seconds if no function is selected.
13.2Programming your machine to the correct water hardness (only with FILTER NO)
Please refer to Chapter 4 “Adjusting your machine to the water hardness”.
13.4Programming the amount of powder for coffee and espresso
You can adjust the amount of powder for coffee and espresso separately.
14
