To stop the process prematurely, turn the switch (22) back to 
.
You can also change the amount of water set while the machine is brewing coffee. Open the programming door. Turn the Rotary Switch (4) until the display indicates the required amount (ML). The amount of water can be selected in increments of 5 ML.
The amounts given in ML are approximate values and may vary from the effective quantity.
10. Drawing off steam
Make sure the nozzle has engaged properly. If the nozzle is clogged with dried milk or has not been attached properly, it might suddenly come off during operation.
To ensure perfect operation, clean the
Steam can be used for heating liquids and frothing milk for cappuccino. When heating liquids, make sure the
A small amount of water leaks from the jet when you start frothing. This does not affect the result, e.g. when frothing milk.
There might be some initial splashing when drawing off steam. The steam jet gets hot. Avoid direct contact with the skin!
SELECT PRODUCT
Place a cup under the pivoting steam spout (23) and dip the
Press the Steam Portion key 
.
STEAM PORTION
You can stop the process any time by pressing the Steam Portion key 
.
SELECT PRODUCT
You can set the duration of drawing off steam in
11. Frothing milk
The IMPRESSA is ready to froth milk when both Steam key lights
light up constantly.
If the lights are off, press one of the two Steam keys 
.
11.1Frothing one portion of milk (with the 2-stage frothing jet)
SELECT PRODUCT
Pour milk into a jug or similar receptacle.
Dip the 
key.
STEAM PORTION
The steam dispensing process stops automatically.
11.2Frothing milk
(with the
SELECT PRODUCT
Pour milk into a jug or similar receptacle.
12
