JVC 0204-T-CR-JMUK manual EXT Setting, „ y S-VIDEO input, ID List, Dubbing

SET UP menu

EXT SETTING

1Choose EXT SETTING, then press the a or 3 button

The EXT SETTING menu appears.

EXT SETTING
EXT-1
	DUBBING
EXT-3		EXT-2
EXT-4
TV	TV	OK	ID LIST
D0020-EN

2Follow the instructions for the function you want to use and operate the function

y:

You can enjoy the high-quality picture of the 2 S-VIDEO signal (Y/C signal).

ID LIST:

You can have a name for each of the devices connected for each EXT terminal.

DUBBING:

You can choose a signal source to be output from an EXT-2 terminal.

„y (S-VIDEO input)

You can connect a device (such as an S-VHS VCR) to enjoy the high-quality picture of the S-VIDEO signal (Y/C signal).

Preparation:

•First read the device’s instruction manual and “Additional preparation” on page 37 to connect the device to the TV properly. Second, follow the device’s instruction manual to set the device so that it sends an S-VIDEO signal (Y/C signal) to the TV.

•Do not set y(S-VIDEO input) to an EXT terminal connected to a device which cannot output an S-VIDEO (Y/C signal). If it is set wrongly, a picture cannot appear.

1Press the 5 or 6 buttons to choose an EXT terminal

EXT SETTING
EXT-1
	DUBBING
EXT-3		EXT-2
EXT-4
TV	TV	OK	ID LIST
D0020-EN

2Press the yellow button and set the y (S-VIDEO input). Then press the a button

An y(S-VIDEO input) mark is displayed. You can view an S-VIDEO signal (Y/C signal) instead of the regular video signal (composite signal).

To cancel the y (S-VIDEO input) setting:

Press the yellow button and turn off y(S- VIDEO input) mark. The regular video signal (composite signal) pictures are resumed.

•The EXT-1 terminal does not support S- VIDEO signal (Y/C signal) and you cannot set y(S-VIDEO input) in the EXT-1 terminal.

•Setting y(S-VIDEO input) changes the head character from “E” to “S”. When an EXT terminal receives a normal video signal, “E1”, “E2”, “E3” or “E4” appears on the display. This changes to “S2” or “S3” when it receives an S-VIDEO signal.

•Even a device which can output an S-VIDEO signal (Y/C signal) may output a regular video signal (composite signal) depending on the device setting. If a picture cannot appear because the y (S-VIDEO input) setting has been made, read the device instruction manual carefully again to check for the device settings.

34