JVC 2EN Basic Recording, Load a Cassette, Enter RECORD-STANDBY Mode, Start Shooting

12ENRECORDING

BasicRecording

LENS COVER Switch

Power indicator

Power Switch

Start/Stop Button

Tally lamp

(lights while recording is in progress)

NOTE:

You should already have performed the procedures listed below. If not, do so before continuing.

●Power (☞ pg. 4)

●Tape Length Setting (☞ pg. 8)

●Recording Mode Setting (☞ pg. 8)

●Grip Adjustment (☞ pg. 10)

LOAD A CASSETTE

1 Slide EJECT to open the cassette holder, then insert the cassette with the label facing out. Press PUSH to ensure the holder is closed and locked.

ENTER RECORD-STANDBY MODE

2 Slide the LENS COVER Open/Close Switch to open the lens cover, then set the Power Switch to

CAMERA.

•The power indicator lights and the camcorder enters the Record-Standby mode.

•The scene you’re aimed at appears on the viewfinder screen, with the word “PAUSE” superimposed upon it.

START SHOOTING

3 Press the Recording Start/Stop Button.

•“REC ” appears in the viewfinder while recording is in progress.