Customized setting, Auto Shutoff, EXT. Input TV/VIDEO

PR LIST

Customized setting (continued)

You can set the TV to turn off automatically when no signal is received for about 15 minutes or longer after the end of a broadcast.

Select AUTO SHUTOFF in INSTALL menu, then choose ON or OFF.

❇MENU INSTALL menu AUTO SHUTOFF

The AUTO SHUTOFF function does not turn off the TV’s main power.

The AUTO SHUTOFF function is not available in video mode.

You can select TV or video terminal input with one touch. Press the TV/VIDEO button to select an input.

To operate this function with a menu:

❇MENU INPUT menu EXT. INPUT

You can display the programme number, video terminal number and PR list on the screen.

Press the DISPLAY button to select the desired mode:

You can set the VIDEO-2 SETTING according to the video signal output from the external devices connected to the VIDEO-2 terminal.

Select the VIDEO-2 SETTING in INSTALL menu, then choose a setting.

❇MENU INSTALL menu VIDEO-2 SETTING

VIDEO	If a normal video signal (composite video signal) is
	input.
COMPONENT	If a component video signal (Y/CB/CR) is input.

For connecting methods, see “Additional Preparation” on page 20.

ON OFF PR LIST

Choose a TV channel or a VIDEO terminal.

1Press the DISPLAY button to display the PR LIST.

2Select a programme number or video terminal by pressing the

5/∞ button to move up/down on the programme number or press the 2/3 button to skip for each 7 programme numbers, then press MENU/OK button.

-7 OK +7

To operate this function with a menu:

❇ MENU INPUT menu DISPLAY

❇About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 5.