10
Adjusting the picture – USER
You can adjust the desired picture setting when selecting USER
in PICTURE MODE.
1Select the USER in PICTURE MODE under PICTURE menu.
2Select the PICTURE SETTING in PICTURE menu, then adjust
the setting.
CONTRAST 2 : Lower contrast 3 : Higher contrast
BRIGHT 2 : Darker 3 : Brighter
SHARP 2 : Softer 3 : Higher
COLOUR 2 : Lighter 3 : Deeper
TINT* 2 : Reddish 3 : Greenish
*TINT can only be adjusted in NTSC system.
PICTURE BOOSTER
You can improve picture clarity when the picture is unclear due
to the low signal reception.
Press the PICTURE BOOSTER button to select the desired
mode.
HIGH Perform at maximum level.
LOW Perform at minimum level.
OFF Cancel the function
To operate this function with a menu:
Basic setting for picture (continued)
MENU PICTURE menu PICTURE FEATURES menu
PICTURE BOOSTER
WHITE BALANCE
You can change the white balance of the picture to better match
the type of video being viewed.
Select the WHITE BALANCE in the PICTURE menu, then choose
the desired setting.
NORMAL Normal white balance.
COOL Bluish white.
WARM Reddish white.
❇About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
MENU PICTURE menu WHITE BALANCE
MENU PICTURE menu PICTURE MODE
USER
MENU PICTURE menu PICTURE SETTING
❇
❇
❇
❇
GGT0045-001C-H(01-10) 8/6/04, 4:24 PM10