JVC AV-21FT, AV-21AT specifications Return +, On Timer, Channel Scan

1-10

Other Features

Other Features

AV-21FT

ECO
SENSOR
SYSTEM
COLOUR	SOUND
TV/VIDEO	1
	4
OFF	7
TIMER
CHANNEL	RETURN+
SCAN

POWER
	PICTURE
	MODE
2	3
5	6

89

0-/--

Return +
By setting a channel to “Return
channel”, you can return to that
channel with one touch.
1.	Press CHANNEL	/	or the
	Number buttons to select a
	channel to set to “Return
	channel”.
2.	Press RETURN + for more
	than 3 seconds continuously.

On Timer
Your TV will automatically turn on and
tune into the channel you want after a
certain period of time you have
specified.
1.	Press MENU	/	repeatedly
	to display the MENU 1.
2.	Press MENU	/	to select
	ON TIMER.

5.	Press DISPLAY to turn the
	display off.
6.	Press POWER to turn the TV
	off.
	The ON TIMER lamp will stay lit.
	Notes:

• If you turn off the TV’s main power by

pressing the Main power button, the

On Timer setting is canceled.

• If you do not turn off the TV after

starting the On Timer, once the time

No. 56003

DISPLAY	MUTING
MENU
CHANNEL	VOLUME
REMOTE CONTROL UNIT
RM-C364

Channel Scan
You can search for the channel you
want to view while scanning all of the
channels that can be viewed on this
TV.
1.	Press CHANNEL SCAN.
	Channels will be scanned in
	channel No. order.
2.	When the channel that you
	want to view appears, press
	CHANNEL SCAN again
	before scanning for the next
	channel begins.
Note:

•Channel Scan selection cannot be selected for channels to which the Skip has been set to YES. (See page 11.)

............................................................

RETURN PLUS PROGRAMMED!

appears.

3. When viewing another

channel, press RETURN +.

The channel changes to the

channel set for “Return channel”.

To cancel the channel set for

“Return channel”:

Press the RETURN + button for more

than 3 seconds continuously.

•RETURN PLUS CANCELLED! appears.

Notes: .................................................

•When you turn the TV off, the “Return channel” setting will be canceled.

•When you press the RETURN + button while viewing the channel set for “Return channel”, the channel changes to the previously viewed channel.

•When you press the RETURN + button while in a VIDEO mode, the mode switches to TV mode. To return to the channel set for “Return channel”, press the RETURN + button again.

............................................................

When there is no setting for “Return channel”: When you press the RETURN + button, the channel changes to the previously viewed channel.

	MENU	1
	INPUT		TV	Channel
	ON TIMER
	PR 1 0:00			No.
	VNR		OFF
	PROGRAM BY -+
	SELECT BY	EXIT BY
	OPERATE BY VOL-+ DISPLAY
3.	Press MENU –/+ to select a
	channel you want to view
	when the TV turns on.
	Note:
	• You cannot select the channel AV, the
	VIDEO modes, and the channels for
	which the Skip is set (See page 11).
	......................................................
4.	Press VOLUME –/+ to select
	the period of time after which
	you want to turn on the TV.
	The ON TIMER lamp lights and the
	On Timer starts.
	• Each time you press the button,
	the period of time changes in 15
	minute intervals (up to 12 hours).
	MENU	1
	INPUT		TV
	ON TIMER
	PR 3 11:00
	VNR		OFF
	PROGRAM BY -+
	SELECT BY	EXIT BY
	OPERATE BY VOL-+ DISPLAY
	To cancel the On Timer:
	Press the VOLUME –/+ button to
	return the period of time to 0:00.

set for the On Timer is reached, the

channel will automatically switch to

the channel set for the On Timer.

......................................................

While the On Timer is operating: The ON TIMER lamp lights.

When the time set for the On Timer is reached: The TV automatically turns on and the channel set for the On Timer is displayed.

Notes: .................................................

•For safety reasons the TV will automatically turn off if no operations are made within approximately two hours after the TV is turned on with the On Timer.

•The Off Timer and Auto Shutoff have priority over the On Timer.

............................................................

18 19