10
Picture setting (continued)
AI ECO SENSOR (ECO)/ECO MODE
You can automatically adjust TV screen contrast according to the
brightness of your room.
OFF Cancel the function.
MODE-1/ECO-1 Mild contrast (recommended).
MODE-2/ECO-2 Even contrast.
DISPLAY (for Al ECO SENSOR only) Display the graphic of the function.
You can also operate this function from the menu.
FEATURES menuMENU AI ECO SENSOR / ECO MODE
When DVD THEATER STATUS set to ON, Al ECO SENSOR / ECO
MODE is not available in VIDEO-2. \ Page 8.
Correcting the Slanting Picture (PICTURE TILT)
You can correct the picture tilt caused by the earthʼs magnetic force.
1 FEATURES menuMENU PICTURE TILT
The following display appears.
PICTURE TILT
DISPLAY : BACK
MENU : EXIT
2 Tilt the picture
becomes level
To confirm
Picture in picture (PIP) operation
You can display a sub picture within the main picture on the screen.
to display the sub picture.
You can hear the sound from the main picture only.
When main picture and sub picture are the same TV channel:
Press SUB-P -/+ Main picture will be changed TV channel follow as sub
picture.
Press (Input) To change sub picture to video mode.
Press CHANNEL -/+ Sub picture will be changed TV channel follow as Main
picture.
Press CHANNEL -/+ Until main picture change to video mode.
To cancel, press the PIP button again.
While a sub picture is being displayed, you can perform the following
functions.
(SUB-P) Select the desired TV channel for sub picture.
(Input) Select the input source for the sub picture.
(Swap) Swap between the main picture and sub picture.
(Position) Change the sub picture position.
lower right → lower left
upper right → upper left
(Freeze) Freeze the sub picture.
When VIDEO-2 is set to component, you cannot select VIDEO-2 for sub
picture.
When VIDEO-2 is set to component and if the input source of the main
picture is set to VIDEO-2 with component, PIP button is disabled and sub
picture cannot be displayed.