TV channel presetting, Auto Program | JVC AV-29QX27, AV-21RX18

(blue) to activate the MANUAL function. (The sound system of the channel appears at the right of the CH/CC number.)

to choose an appropriate sound system.

For details, see “SOUND SYSTEM”. \ Page 12

TV channel presetting

You can register the TV channels automatically.

1 MENU	SET UP menu	AUTO PROGRAM
2		AUTO PROGRAM
		AUTO PROGRAM
	or	22%
	or	OK / : EDIT
		OK / : EDIT
3	to stop or when AUTO PROGRAM finishes.

To edit the channel list Proceed to Step 2 of “To edit the channel list” on this page.

If a channel is not	Proceed to Step 3 of “To register the TV channels
registered	manually” on this page.
To exit the menu	Press the MENU button.

To register the TV channels manually (MANUAL in the EDIT menu)

You can register the TV channels into the TVʼs channel list manually.

3 Choose the channel which you want to register.

6	(red)	OR	(green) to search for the TV channel.
7 Searching stops when a channel is found and displayed.

	If the reception is		Press the yellow or blue button to fine tune the TV
	poor		channel.
	If noisy sound is		Press the 3 button to choose an appropriate sound
	heard		system.

8 to exit.

To edit the channel list

(MOVE, DELETE and INSERT in the EDIT menu)

You can edit the TV channel list as you like.

After this operation, other channelʼs PR number will be changed.			FUNCTIONS
1 Repeat Steps 1 and 2 of “To register the TV channels manually
	(MANUAL in the EDIT menu)”, \ see left.
2 Choose the channel which you want to change its PR number, or
3	delete, or register a new channel.
	To change the	Press the 3 button. Then move it to the new PR number
	PR number	you want to use for the channel by pressing the 5/∞ button.
	(MOVE)	Finally press the 2 button.
	To delete	Press the yellow button.
	the channel
	(DELETE)
	To add the	If you add a new TV channel of NTSC-M system, press the
	new channel	SOUND SYSTEM button to change the sound system to M,
	(INSERT)	then select EDIT/MANUAL in SET UP menu. Press the green
		button, then press the 3 button to choose “CC” or “CH”.
		Enter the CH/CC number for the channel you wish to add.
		The TV starts to search for the channel.
		When a TV channel has already been registered in PR99,
		using the INSERT function deletes that TV channel.
4	to exit.