- 17 -
Picture Menu
Press MENU button, now you are in main menu. In
the Main menu, select Picture using   or   but-
ton, then enter the Picture menu by pressing   /
or OK button.

Setting Brightness

 As you enter the picture menu, Brightness will be the
first selected option.
 Press   button to brighten the picture.
 Press   button to darken the picture.

Setting Contrast

Contrast is the difference and distribution of light and
dark tones in an image.
 Using   or   button select Contrast.
 Press   button to increase contrast level.
 Press   button to decrease contrast level.

Setting Colour

 Using   or   button select Colour.
 Press   button to increase colour saturation.
 Press   button to decrease colour saturation.

Setting Sharpness

 Using   or   button select Sharpness.
 Press   button to sharpen the picture.
 Press   button to soften the picture.

Setting Tilt

This function is used for tilt correction of the picture.
 Using   or   button select Tilt.
 Press   button to rotate the picture to the right.
 Press   button to rotate the picture to the left.

Setting Hue (In AV mode only)

(During Playback NTSC system, this will appear in AV
mode only when NTSC video source is applied. Other-
wise, HUE option is invisible in Picture menu.):
 Using   or   button select Hue.
 Press   button to increase the green tones.
 Press   button to increase the red tones.
Center value is indicated with two reciprocal arrows.

Setting Picture Mode

This item is used to change the picture mode. By press-
ing   or   button you may select one of these
options: STANDARD, SOFT and BRIGHT.
You can also set the Picture Mode by pressing the Blue
button directly.

Setting Colour Temp

This item is used for white colour tint adjustment. By
pressing   or   button you may select one of these
options: COOL, NORMAL, WARM.

Setting VNR (Video Noise Reduction)

This item is used to reduce the image noise and im-
prove the picture quality at weak signals.
 Using   or   button select VNR.
 Press   or   button to set VNR level to OFF,
MIN, AUTO or MAX.
AUTO adjusts the VNR level to OFF, MIN or MAX auto-
matically according to the intensity of the noise.

Setting VCR Mode (In AV mode only)

 Using   or   button select VCR Mode.
 When you watch a picture from your VCR and the
picture is unstable, you may improve it by changing
the VCR MODE setting from ON to OFF.

Reset

Press BLUE button to reset the picture modes to fac-
tory default settings.

To Store the Settings

In the Picture Menu, all settings are stored automati-
cally.
JVC-AK49-IDTV-ENG-28&3229W-VDOLBY-BSI-C1815S-(AV-28&32E88SK)-50062788.p65 24.05.2005, 15:2117