JVC AV-28E88SK, AV-32E88SK End:, Name:, Date:, Mode:, Start:, WARNING :, When the “, When the “, Cancelling the timer setting, While the timer is in operation:

3.Use the “” / “” buttons, number buttons and OK button to set the timer.

•When setting the start time and end time, input 1200 for 12:00 PM, 1500 for 3:00 PM and 0000 for 12:00 AM.

•Press BACK button anytime to cancel the timer set- tings.Name:Use the “” / “” buttons to choose the channel for which the timer is to be set.

Press the “ ” button.

Start:Set the timer start time with the number buttons.•When the “” / “” buttons are pressed, the input position moves.

Press the “ ” button.

End:Set the timer end time with the number buttons.

•When the “” / “” buttons are pressed, the input position moves.

Press the “ ” button.

Date:Set the date for the timer to work with the numbers.

•When the “” / “” buttons are pressed, the input position moves.

Press the “ ” button.

Mode:

Use the “” / “” buttons to choose the timer mode (Once/Daily/Weekly), and then press the OK button.

4. Prepare your VCR for recordingWhen recording on a T-V LINK compatible VCR:1.Insert the videotape for recording into the VCR and set the recording mode.2.Make sure the VCR is ready to receive Direct Rec commands from the TV.3.Make sure VCR timer settings do not coincide with the TV timer settings.• For details, see your VCR instruction manual.

When recording on a T-V LINK incompatible VCR:

1.Insert the videotape for recording into the VCR and set the recording mode.

2.Set the VCR recording timer settings.3.Make sure that the start and end time match with the TV timer.

4.Set the VCR to record the signal from the external input that the TV is connected to.

• For details, see your VCR instruction manual.

When you have finished the step 4, you have set the timer.When you are not watching TV, make sure the TV is in stand by.WARNING :

Do not turn off the main power. The timer function will not work with the main power switched off.

When you are watching TV at the timer start time, a message appears on the screen to inform you the timer is about to start and the TV switches to the programme that the timer is set to.

•When performing timer recording with a T-V LINK com- patible device, test the timer recording before you record the programme. There are some T-V LINK com- patible recording device that will not correctly receive the Direct Rec command from the TV.

If the recording device does not operate when the re- cording start time is reached, it means VCR is not receiving the Direct Rec command from the TV. In this case, follow the instructions of “When recording on a T-V LINK incompatible VCR:”.

While the timer is in operation:

•You can turn the TV on or off (Stand by). WARNING: Do not turn off the main power.

•You can watch analogue terrestrial broadcasting chan- nels or the pictures via an EXT terminal.

•Please note that any programme information that ap- pears on the screen, such as when making changes to the Digital terrestrial broadcasting (DVB-T) channel picture, will be superimposed over the picture in the VCR recording.