JVC AV-28E88SK, AV-32E88SK Analogue Teletext, To operate Teletext, To select a page of Teletext, To Select Index Page, Searching for a teletext page while watching TV

REGULAR:

Use to view a normal picture (4:3 aspect ratio) as this is its original shape.

PANORAMIC:

This stretches the left and right sides of a normal picture (4:3 aspect ratio) to fill the screen, without making the picture appear unnatural.

The top and bottom of the picture are slightly cut off.

14:9 ZOOM:

This zooms up the wide picture (14:9 aspect ratio) to the upper and lower limits of the screen.

16:9 ZOOM:

This zooms up the wide picture (16:9 aspect ratio) to the full screen.

16:9 ZOOMS (SUBTITLE):

This zooms up the wide picture (16:9 aspect ratio) with subtitles to the full screen.

Analogue Teletext

Teletext is an information system that displays text on your TV screen. Using the Teletext information system you can view a page of information on a subject that is available in the list of contents (index).

On screen display is not available in text mode.

Contrast, brightness or colour control is not available, but volume control is available in text mode.

To operate Teletext

•Select a TV station on which Teletext is being trans- mitted.

•Press (TELETEXT) “” button. Usually the list of contents (index) is displayed on the screen.

To select a page of Teletext

•Press the appropriate digit buttons for the required Teletext page number.

The selected page number is displayed at the top left corner of the screen. The Teletext page counter searches until the selected page number is located, so that the desired page is displayed on the screen.

•Press “ ” button to move the Teletext screen for- ward one page at a time.

•Press “ ” button to move the Teletext screen back- ward one page at a time.

To Select Index Page

•To select the page number of the index (generally page 100), press “” button.

Searching for a teletext page while watching TV

•In the Teletext mode pressing “ ” button will switch the screen to the TV mode. In the TV mode enter a page number using digit buttons. As you enter last

digit of page number, “” sign will replace the page number and flash until the entered page number is

found. Then the page number will replace “” sign again. Now you can display this teletext page by press- ing “ ” button.

To Select Double Height Text

•Press “ ” button for the top half of the information page to be displayed in double height text.

•Press “ ” button again for the bottom half of the information page to be displayed in double height text.

•Press “ ” button once more for the full page of nor- mal height text.

- 22 -