JVC AV-28ED5SN, AV-28ED5BN, AV-28ED5BN, AV-28ED5SN manual Connect the External Equipments

Connect the External Equipments

Via the Euroconnector

Your TV set has two Euroconnector sockets. If you want to connect equipments (e.g. video recorder, decoder, etc.) which have Euroconnectors, to your TV, use the EXT.1 (EXT-1), EXT.2 (EXT-2) terminals.

T-V LINK compatible VCR

Be sure to connect the T-V LINK compatible VCR to the EXT.2 terminal. If not, the T-V LINK function will not work properly.

•When connecting a T-V LINK compatible VCR to the EXT.2 terminal, be sure to connect the decoder to the VCR. If not, the T-V LINK function may not work properly. And then set the DECODER (EXT-2) function for the channel to ON to un- scramble a scrambled channel. For details, see “Using the Decoder (EXT-2) function” on page 26.

RGB mode

If an equipment can output the RGB signals, connect it to the EXT-1 (EXT.1) terminal.

EXT-2 S Mode

If the equipment connected to your TV set supports S-Video (Y/C) output from Euroconnector, you can have a better pic- ture quality by selecting EXT-2 S mode and connecting your equipment to the EXT.2 (EXT-2 S) terminal of TV. See your equipment's booklet to check if your equipment has such fea- ture.

Via the RCA jacks

If you have an equipment (such as a Camcorder) which has the RCA jacks, connect it to the Front AV (EXT-3) terminal with the video and audio cables.

•If the epuipment has the mono audio jack, connect it to the AUDIO-L jack.

Via the ANT (aerial) socket

If your equipment does not have a Euroconnecter or RCA jacks, connect it to the TV with an aerial cable. For details, see the manual provided with the equipment.

•To store the test signal that comes from the equipment in a programme number, follow the instructions of "Tuning menu" on page 24. The programme number 0 is usually used for the external equipment.

•After storing, you can watch images from the equipment by selecting the programme number which you stored the test signal.

TV and Video Recoder (VCR)

•Connect the Video Recorder to the ANT (antenna input) socket of the TV with the aerial cable.

•Connect the Video Recorder to the EXT.1 or EXT.2 terminal with the SCART cable, or connect it to the Front AV (EXT-3) terminal with the audio and video cables.

•When you watch a picture from your VCR and the picture is unstable, you may improve it by changing the “Mode” set- ting in the “TUNING” menu. (See the “Tuning Menu” on page 24.)

NTSC Playback

Connect a NTSC video recorder to a terminal. Then press “AV“ button to select the corresponding AV mode.

NTSC 3.58/4.43 system is detected automatically in AV mode.

Copy Facility

You can output the video and audio signals which inputs from TV, EXT.1 (EXT-1) or Front AV (EXT-3) terminal to the video recorder connected to the EXT.2 (EXT-2) terminal.

•To select the output source, see “Setting External Source Output ” on page 27.

Connecting Headphones

Use the stereo headphone socket of your TV, to connect headphones. As soon as you connect your headphone to the headphone socket, TV’s loudspeakers will automatically mute.

ENGLISH - 30 -