JVC AV-28ED5BN, AV-28ED5SN, AV-28ED5SN, AV-28ED5BN manual Dqg

In an AV mode, you can change only the “MODE” or “CO-						• When you cannot search a channel you want, select the
LOUR SYSTEM” setting.						"Standard" item and select other broadcasting system.
• If you want to modify the current settings of a channel, se-						Then start searching again.
lect the channel of which you want to modify the setting.
Then display the main menu on the screen.						Standard:
• Press “	“ or “			” button to select “TUNING” item.
		781,1*￿￿￿￿￿￿￿￿￿￿￿&￿￿				• If you cannot hear the normal sound even when the picture
• Press “ ” or “ ” button to enter “TUNING” menu.						appears normally, select the correct broadcasting system to
						hear the sound normally.
						• Select "Standard" item. Then press “ ” or “ ” button to se-
						lect a broadcasting system.
			&RORXU￿V\VWHP			Colour system:
			3URJUPPHHDUFK			• If the picture is not clear or no colour appears, select the
						correct colour system to display the picture normally.
						• Select "Colour system" item. Then press “ ” or “ ” button
			6WDQGDUG			to select a colour system.
						Band, Channel:
			%DQG
						• If you know a channel number, you can find it directly by
						entering the channel number.
						• Select the "Band" item. Then press “ ” or “ ” button to se-
						lect the band (C or S) where the channel you want is lo-
1. Press “	“ or “			” to select an item in the “TUNING”		cated.
menu. Then press “ ” or “ ” button to change the setting.
2. After all settings of a channel are completed, press “					“
						• Select the “Channel” item. Then press “ ” or “ ” button to
or “	” button to select “Programme” item. Then press
						select the channel number, or enter the channel number
“ ” or “ ” button to select a programme number which you
						with the digit buttons. The available channel numbers differ
want to store the setting.
						depending on your “COUNTRY” and “Standard” settings.
3. Press “	“ or “			” button to select “Store” item. Then		Fine tuning:
press “ ” or “ ” button to store the setting.
The "STORED" appears at the bottom of the menu for 3						If the channel reception is poor, fine-tune the channel.
seconds. Then3,&'RZQORDG7T￿9-￿V/LQNLINK&￿￿79menuFHOWLQXH￿￿￿￿9&5appears￿)HDWXUH.						• Select "Fine tuning" item. Then press “ ” or “ ” button to
						fine -tune the channel.
						Name:
						You can store the channel name or change it.
						• Select “Name” item. Then press “ ” or “ ” button to display
4. If you do not have a T-V LINK compatible VCR, press						a cursor.
						• Press “	” or “	” button to select a character and
“PICTURE” button to exit the menu.
						press “ ” or “ ” button to move the cursor.
If you have a T-V LINK compatible VCR connected to the
						• After the name is completed, press the MENU button.
EXT.2 terminal, follow the operating procedure “Down-
loading the data to VCR” on page 21 to transmit the
Programme table data to the VCR.						Mode:
Search:
						Set "Mode" item to "TV" for the TV channels.
You can search a channel manually.						• When you watch a picture from your VCR and the picture is
• Select "Search" item. Then press “ ” or “ ” button to start						unstable, you may improve it by changing the "Mode" set-
searching. "SEARCHING" is displayed while the TV is						ting from "TV" to "VCR".
searching a channel.
• Searching stops when the TV finds a channel. Then the
						Decoder (EXT-2):
channel is displayed.
• Press “ ” or “ ” button repeatedly until the channel you want						You can only set “Decoder (EXT-2)” item to “ON” if you have
appears.						a decoder connected to a T-V LINK compatible VCR, which

ENGLISH - 25 -