![](/images/new-backgrounds/1201313/20131315x1.webp)
Note: When Picture Mode is not “USER”, BRIGHTNESS, CONTRAST and COLOUR options can not be operated “” or “
” button.
Factory Settings:
When Picture Mode is selected User if you press the YEL- LOW button the adjustmens switches themselves to the fac- tory settings.
You can change the values of this items firstly by selecting
the item by “ “ or “
” button and then by using “
” or “
” button. The PICTURE menu disappears and level indica- tors are displayed while items are changed. The PICTURE menu is restored after adjustment is finished.
This item is used to change the picture mode. By pressing “” or “
” button you may choose one of these options:
Bright, Standard3,&785(, Soft6KDUSQHVV&R%ULJKWQHVV3LFWXUH, QWUDVWORXUUser0RGH.
You can change Brightness only when Picture Mode is se- lected User.
•You can change the Brightness by “” or “
” button after selecting this item.
You can change Contrast only when Picture Mode is select- ed User.
•You can change the Contrast by “” or “
” button after se- lecting this item.
You can change Colour only when Picture Mode is selected User.
•You can change the Colour by “” or “
” button after select- ing this item.
•You can change the Sharpness by “” or “
” button after selecting this item.
•You can adjust the Colour Temp item as Normal, Warm
and Cool. Using “” or “
” button toggle between these three settings.
3,&785(![](/images/new-backgrounds/1201313/20131315xi22.webp)
&RORXU=RRP1LVH6KDUSQVVUHGXFWLRQ7HPS
•The Noise reduction can be adjusted in four different lev- els: Minumum, Medium, Maximum and Auto. Addition- ally it can be cancelled by selecting the OFF option. Press- ing “” or “
” button toggles between these five settings.
•The Zoom can be three different modes: Auto, 4:3 or 16:9
modes. Using “” or “
” button toggle between these differ- ent screen formats.
The Picture Mode can be stored for all channels (200 chan- nels) individually.
It is also possible to change picture modes directly by press- ing “ZOOM” button (RED button) on your remote control.
•You can change the Hue for NTSC 3.58/4.43 systems by
“” or “
” button after selecting this item. A level indicator for Hue is displayed while changing this item. The Hue bar is displayed while an NTSC signal is input from the
Recalling Factory settings.:
You can
• Press “PICTURE” button when no menu appears.
Sound Menu
To change sound settings:
•Press “MENU” button, now you are in main menu. In the
main menu, select SOUND using ““ or “
” button, then enter the sound menu pressing “
” or “
” button.
Setting Volume:
Using ““ or “
” button to select Volume.
•Press “” button to increase volume.
•Press “” button to decrease volume.
ENGLISH - 23 -