Setting up your TV

Connecting the aerial

•The connecting cables are not provided.

•For further details, refer to the manuals provided with the devices to be connected.

Caution

• Turn off all the equipment including the TV before connecting anything.

„If you connect via a device with an

antenna terminal such as a VCR, follow A → B → C in the diagram opposite.

„If you connect the antenna directly to the TV, follow 1.

•To connect more equipment, please see “Connecting the external devices” on page 53.

•To connect additional audio equipment, see “Connecting Speakers/Amplifier” on page 55.

•When receiving Digital terrestrial broadcasting (DVB-T), reception can suddenly be lost if the signal becomes weak. Use a correctly installed high- performance antenna.

•When connecting via a device with an antenna terminal such as a VCR, depending on the connection method, the signal may be weakened. If this happens, use a booster to increase the signal strength.

•In areas with a lot of radio communication such as near ports or airports, noise may be introduced into the picture or sound. In such cases, reception may be improved by using a high-performance antenna.

•Read the instruction manual of the devices which you connect to the TV.

Aerial

Back of the TV

75-ohm Coaxial Cable

SERVICE

EXT-1

L

 

R

EXT-2

AUDIO OUT

21-pin

SCART

Cable75-ohm Coaxial Cable

VCR

To Aerial

Input

To Aerial

AV IN/OUTOutput

Terminal

CAM (CI) slot

SERVICE

Not available (For service adjustments)

6