Setting up your TV

 

 

 

 

 

 

To view the pay-per-view of the

Connecting the power cord to

Digital Terrestrial broadcasting

 

the AC outlet

It is required to subscribe to a pay-per-view company to view the pay-per-views of the Digital Terrestrial broadcasting.

Obtain the Conditional Access Module (CAM) and the Viewing card by subscribing to a pay-per-view company, then insert those to the Television using the following procedure.

1Switch off the TV and unplug from the mains.

2Insert the Viewing Card to the CAM.

•The Viewing Card should be inserted straight into the slot.

3Insert the CAM to the slot of the TV.

•The CAM should be correctly inserted, it is impossible to insert fully if reversed. The CAM or the TV terminal may be damaged if the CAM is forcefully inserted.

4Connect the TV to the mains supply, switch on, and then wait for few moments until the card is activated.

•Some CAMs may require the following set up.

Please set the CAM by entering the

DTV menu, Common Interface then pressing abutton. (CAM set up menu is not displayed when it is not required.)

•To see the viewing contract information, press H, Select DTV and Press a, then Select Common Interface and press a.

Insert the AC plug on the power cord from the TV into an AC outlet.

Caution

•Operate only from the power source specified (AC 220 – 240 V, 50 Hz) on the unit.

Putting the batteries into the remote control

Use two AA/R6 dry cell batteries.

Insert the batteries from the -end, making sure the +and -polarities are correct.

•Follow the warnings printed on the batteries.

•Battery life is about six months to one year, depending on how much you use the remote control.

•The batteries we supply are only for setting up and testing your TV, please replace them as soon as you need to.

•If the remote control does not work properly, replace the batteries.

7