ENGLISH - 13 -
Connect the External Equipments

Via the Euroconnector

Your TV set has two Euroconnector sockets. If you want to
connect equipments (e.g. video recorder, decoder, etc.)
which have Euroconnectors, to your TV, use the EXT.1
(EXT-1) or EXT.2 (EXT-2) terminals.
If an external device is connected via Euroconnector sockets
TV is switched to AV mode automatically.

T-V LINK compatible VCR

Be sure to connect the T-V LINK compatible VCR to the
EXT-2 terminal. If not, the T-V LINK function will not work
properly.
 When connecting a T-V LINK compatible VCR to the EXT-2
terminal, be sure to connect the decoder to the VCR. If not,
the T-V LINK function may not work properly. And then set
the DECODER(EXT-2) function for the channel to ON to un-
scramble a scrambled channel. For details, see
Decoder(EXT-2) on page 10.

RGB mode

If an equipment can output the RGB signals, connect it to
the EXT.1 (EXT-1) terminal.

EXT-2S Mode

If the equipment connected to your TV set supports S-Video
(Y/C) output from Euroconnector, you can have a better pic-
ture quality by selecting EXT-2S mode and connecting your
equipment to the EXT.2 (EXT-2S) terminal of TV. See your
equipment's booklet to check if your equipment has such
feature.

Via the RCA jacks

If you have an equipment (such as a Camcorder) which has
the RCA jacks, connect it to the Front AV (EXT-3) terminal
with the video and audio cables.
 If the equipment has the mono audio jack, connect it to the
AUDIO-L jack.

Via the ANT (aerial) socket

If your equipment does not have an Euroconnector or RCA
jacks, connect it to the TV with an aerial cable. For details,
see the manual provided with the equipment.
 To store the test signal that comes from the equipment,
see INSTALL Menu on page 9 and store it to the pro-
gramme number 0. You can watch images from that equip-
ment to select the programme number which you stored the
test signal.

TV and Video Recorder (VCR)

 Connect the Video Recorder to the ANT (antenna input)
socket of the TV with the aerial cable.
 Connect the Video Recorder to the EXT.1 (EXT-1) or EXT.2
(EXT-2) terminal with the SCART cable, or connect it to the
Front AV (EXT-3) terminal with the audio and video cables.

NTSC Playback

Connect a NTSC video recorder to a terminal. Then press
AV button to select the corresponding AV mode.
NTSC 3.58/4.43 system is detected automatically in AV
mode.

Copy Facility

You can output the video and audio signals which inputs from
TV or EXT.1 (EXT-1) terminal to the video recorder connected
to the EXT.2 (EXT-2) terminal.
 To select the output source, see Setting External Source
Output on page 9.

Connecting Headphones

Use the stereo headphone socket of your TV, to connect
headphones.
01-ENG-2835-AK45-C1100UK-4-3-(AV-28KT1&BUF&SUF).p65 28.05.2003, 19:5613