JVC AV 32F704, AV-36FA44, AV-36FA54, AV-27FA54 Initial Setup, Auto Tuner Setup, Channel Summary

Initial Setup

Auto Tuner Setup

The auto tuner setup function is described on page 18 as the interactive plug-in menu. If you need to run the auto tuner setup again, follow the steps below.

Press the MENU button π† To AUTO TUNER SETUP √® To operate

è To choose CABLE or AIR

†To move to START √® To start Auto Tuner Setup

� � � � � � � � � � � � � �

� � � � � � � � � � � � � � � �

� � � � � � � � � �� � � � �

� � � � �

� � � � � � � � � � �

� � � � � � � � � � � � � � � � � � � � �

Programming will take approximately 1 to 2 minutes. The auto tuner is finished when the message PROGRAMMING OVER! appears onscreen.

Channel Summary

Channel summary allows you to customize the line-up of channels received by your TV. You can add or delete channels from the line-up or prevent any unauthorized viewers from watching any or all 181 channels.

Press the MENU button π† To CHANNEL SUMMARY √® To operate

The Channel summary screen will now be displayed with the channels set to scan marked with an “¸”. You can delete channels from the scan by removing the “¸”. If any channels were missed during auto tuner setup and you wish to add them, you may by placing an “¸” next to the channel number.

π† To the SCAN column

è To include or delete from scan Press the EXIT button when finished

� � � � � � � � � � � � � �

� � � � � � � � � � � � � � �

� � � � � � � � � � �	� � � � � � � � � � �
�	� �	�
�	� �	�
�	� �	�
�	� �	�
�	�	� �

� � � � � � � � � � �

� � � � � � � � � � � � � � � � � � � � �

You can block access to a channel by activating the channel lock. Press the MENU button

π† To CHANNEL SUMMARY √® To operate

π† To the Lock Column ( )

Press the ZERO button to lock or unlock that channel Press the EXIT button when finished

25