Magnavox ZV427MG9 Setting the Clock, Contents, Use K / L to select Clock, then, Press OK

SETTING THE CLOCK

Set the clock before you try the timer programming. Follow these steps below.

1	Press [SETUP] and use [K / L] to	Use [{ / B] to select an item to set,
	select “General Setting”, then press	and use [K / L] to select the contents
	[OK].	3 to suit your preference, then press
	“General Setting” menu will appear.	[OK] when you finish setting all the
		contents.
2	Use [K / L] to select “Clock”, then
			Clock Setting
	press [OK].
				JAN	/ 05 / 2012 ( THU )
	“Clock Setting” menu will appear.
					12 : 00 AM

Your setting will be activated.

The clock start counting when you press [OK].

4 Press [SETUP] to exit.

Note

•Your setting will be canceled if you press [SETUP] before pressing [OK] at step 3.

•Your clock setting will be lost if either there is a power failure or this unit has been unplugged for more than 30 seconds when you set the clock manually.

•For setting the day, year, hour, and minute, [the Number buttons] can also be used.

•You can set the built-in calendar from the year 2011 up to 2058.

26EN