Magnavox ZV427MG9 owner manual Satellite Link

SATELLITE LINK

You can set the unit to start recording whenever it	1
detects the video signal from the external tuner.		Press [SETUP].
Preparing for the satellite link timer recording:
Preparation on the tuner
• Satellite link accepts only the connection from L1 (rear)
with the external tuner. (The connection from L2 cannot	2	Use [K / L] to select “Timer
read any signals from the external tuner.)
• The external tuner should be equipped with some kind		Programming”, then press [OK].
of timer function. Using timer function of the tuner, set
it to output audio/video signals when it comes to the
time you want to start recording, and stop output audio/	3	Use [K / L] to select “Satellite Link”,
video signals when it comes to the time you want to		then press [OK].
finish recording. Refer to the tuner’s manual on how to
set the timer.
				Timer Programming
• Make sure to set the satellite link standby mode when
			Timer Programming
you finish setting.
			Satellite Link

4 Use [K / L] to select the time, media and recording mode, then press [OK].

Satellite Link

Start	DVD	Mode
	VCR
5:00PM	DVD SP (2Hr)

To Standby Mode

Use [K / L] to set the desired starting time, then press [B].

• The hour can be selected from 1 to 12 with AM

or PM.

• Repeat procedures in step 5 to set the desired minutes.

• If you wish to go back to the left, press [ {]

6 Use [K / L] to select a recording media (“DVD” or “VCR”), then press [B].

7	Use [K / L] to select the recording
	mode.
	Refer to page 27 for details.

EN 35

Introduction Connections Basic Setup Recording Playback Editing Function Setup VCR Functions Others

Español