Magnavox ZV427MG9 owner manual Information on VCR Functions, Recording

VCR FUNCTIONS

Information on VCR Functions

Caution on using S-video, component, or HDMI connection for VCR:

•Only the playback audio / video are available with these connections.

•Under the condition listed below, the playback image cannot be viewed. Use the standard video connection, in such case; - during DVD recording.

•HDMI video resolution cannot be changed when the unit is in VCR mode.

Playback Recording

Introduction Connections Basic

Press [VCR] first.

1)Insert a prerecorded tape (refer to page 24 on how to insert a cassette tape).

2)Press [PLAY B] to start playback.

3)Press [STOP C] to stop playback.

To pause playback:

Press [PAUSE F].

Playback will pause and sound will be muted.

To resume playback:

Press [PLAY B].

Note

•When a cassette tape without erase-protection tab is inserted, the unit will start playback automatically.

•Tracking will be automatically adjusted upon

playback. To adjust the tracking manually, press [TRACKING/] on the remote control.

•S-VHS cassette tape is not available on this unit.

•Playback will stop when you change the output mode.

Press [VCR] first.

1)Insert a recordable tape with an erase-protection tab intact.

Accidental erasure prevention

To prevent accidental recording on a recorded cassette tape, remove its erase- protection tab. To record on it later, cover

	erase-protection tab
the hole with cellophane tape.

2)Select the recording mode using [REC MODE].

•The desired recording mode is selected in SP (standard play) or SLP (super long play) mode by pressing [REC MODE].

Recording mode:

Tape speed				Recording / playback time
Type of tape
						T60		T120	T160
		SP mode	1hour			2hours
											2-2/3hours
SLP mode			3hours				6hours			8hours

3)Press [SOURCE] to select the appropriate external input position (L1/L2) to which your external tuner is connected.

4)Press [REC] to start recording.

Press [STOP C] to stop the recording.

To pause recording: Press [PAUSE F].

To resume recording: Press [PAUSE F] or [REC].

After the unit has been in pause mode for 5 minutes, it will stop automatically to protect the tape and the video head from damage.

• Refer to pages 31-34 for instructions on timer recording.

Setup Recording Playback Editing Function Setup VCR Functions

Note

•This function is available only when the unit is connected by the VIDEO OUT jack.

EN 83

Others

Español