Button Functions - PIP

Freeze

Swap

Channel +/– for PIP

Source

Use the FREEZE button to lock a single, still image onto the PIP window.
• If PIPis off when FREEZEis pressed, a snapshot of the main screen is taken and placed in
the PIPwindow.
• If PIPis on when FREEZEis pressed, the image in the window when the button was pressed
is held.
You can exchange the channel displayed on the main screen for the one shown in the PIPwin-
dow by pressing SWAP.
Like the main CHANNEL +/– buttons,CHANNEL +/– for PIP lets you scan through the channels in
the PIP window.
• Direct channel selection with the 10 key pad for PIPis not possible.
You can select the signal source for the PIP window image.
•The PIPwindow is 1/9the size of the full screen.
• PIP will not display blocked channels or programs. A blue screen will display instead.
• PIP will not display the following conditions:
• When the Aspect is 16:9
•When the main picture is displayed as 480p, 720p and 1080i
•When the main picture is Digital-In
• Component Connection without S-Video or Composite Connection
NOTE:
49
AV-36P902 English 9/13/01 3:55 PM Page 49