JVC AV-65WP94, AV 56WP94 manual Connecting to a Camcorder, Connecting to the Surround Amplifier

Quick Setup Connections

Connecting to a Camcorder

You may connect a camcorder, game console or other equipment to your television by using the front input jacks (Input 4) located under the front panel door. To access, pull on the door to open it. You can also connect these using the television’s rear input jacks, using the same instructions.

MENU	– CHANNEL +		– VOLUME +		SUPER
					FOCUS
	OPERATE	INPUT-4
			AUDIO
	S-VIDEO	VIDEO	L / MONO	R
	OVER

CAMCORDER

- OR -

1)Connect a yellow composite cable from the camcorder VIDEO OUT, into the VIDEO IN on the front of the TV, OR connect an S-Video cable from the front of the TV to the camcorder.

2)Connect a white cable from the camcorder LEFT AUDIO OUT, into the LEFT AUDIO IN on the front of the TV.

3)Connect a red cable from the camcorder RIGHT AUDIO OUT, into the RIGHT AUDIO IN on the front of the TV.

Note:

•If your camcorder is a mono sound model it will have only one AUDIO OUT. Connect it to the LEFT AUDIO IN on the front of the TV.

Connecting to the Surround Amplifier

Note: Please read the benefit of this feature on page 50.

TV Rear Panel

BLACK

RED

SPEAKER INPUT

16Ω 60W MAX

Front Front Surround

Center Speaker Out

1)Connect the black speaker cable from the TV’s SPEAKER INPUT terminal to the surround amplifier’s CENTER SPEAKER OUTPUT terminal.

2)Connect the red speaker cable from the TV’s SPEAKER INPUT terminal to the surround amplifier’s CENTER SPEAKER OUTPUT terminal.

18