Check memory card type

Make sure that the type of memory card you are using can be used in the printer. For more information, see “Inserting a memory card” on page 60.

Check to see if the memory card is damaged

Check that there is no obvious damage to the memory card.

Check to see if the memory card contains photos

Insert a memory card that contains photos.

Make sure the USB cable is connected

If the printer is connected to the computer through a USB cable:

1Check the USB cable for any obvious damage.

2Firmly plug the square end of the USB cable into the back of the printer.

3Firmly plug the rectangular end of the USB cable into the USB port of the computer.

The USB port is marked with the USB symbol.

Check the network connection

If the printer and computer are connected over a network, make sure that the correct host and device are communicating. Select the printer from the computer or the computer from the printer.

Photos do not transfer from a memory card across a wireless network

These are possible solutions. Try one or more of the following:

Select the printer on your wireless network

Windows users only

If you have more than one printer and use Windows, you must select your wireless network printer.

1Do one of the following:

In Windows Vista, click Œ Control Panel Œ Printers.

In Windows XP and earlier, click Start Œ Settings Œ Printers and Faxes.

2From the list shown, select the printer on your wireless network.

Note: To select the printer, right click the printer, and then select Set as Default Printer.

3Insert the memory card in the printer.

4From the control panel, press .

5Press to choose Select Computer.

6Press .

7From the list shown, select the computer on your wireless network.

8Follow the prompts on the computer screen. For more information, see the “Working with photos” chapter in the User's Guide: Comprehensive Version.

141

Page 141
Image 141
Lexmark 4800 Series manual Check to see if the memory card is damaged, Check to see if the memory card contains photos, 141